Carrying a rifle with Bipod comfortably?

I hunt a lot in those situations, where most of the time a bipod is what is needed. But there are occasions where I like to take my rifle for a walk. It is at these times, that I find the bipod doesn't carry very comfortably (digs into my back /shoulder). I have a standard Howa stock with a short Harris bipod and sling attached to it.

I was wondering if someone has worked out a more comfortable way of carrying a rifle with bipod over ones shoulder?

***************************
And Cody carries his bipods mounted from day one with his rifle, only way for him. Ya know, from the day cody saw a bipod he liked it and liked the idea, its obviously worth every quibble to him, he prefers his bipod over and above anything. So much so, that when we bakkie shoot of x-bags he still uses bipods over roof.

As to your question, I can only suggest trying different sling strap settings.

I was thinking along the lines of bipods that are more ergonomic/less sharp edges to carry compared to the Harris 6-9" or equivalent.

Alternatively, getting a bipod with a quick release system, or something that slips to the side?

Something that integrates into the fore end like a Steyr Scout would be quite a trick. I'm sure there'd be a way to do it if it hasn't already been done.

The R4 rifles had a built-in bipod. I am pretty sure that it should be possible with a hunting rifle too. A fold-over type like the Steyr Scout should work well.

Also look at a quick-detachable bi-pod type.
The Harris screw was not designed for quick mounting and dismounting.

Also look at a quick-detachable bi-pod type.
The Harris screw was not designed for quick mounting and dismounting.

Do you have examples of the quick detach type that are sold locally.

The shops in my area of the woods don't have a lot of choice available.

Also look at a quick-detachable bi-pod type.
The Harris screw was not designed for quick mounting and dismounting.

Do you have examples of the quick detach type that are sold locally.

The shops in my area of the woods don't have a lot of choice available.

I always thought that that was the role of - arca / picatiny rails ?
Have a rail affixed to your rifle stock fore-end then just use the correct quick release mountings

I would have thought that the new hunting sticks/tripods would make the bipods redundant when hunting?

I would have thought that the new hunting sticks/tripods would make the bipods redundant when hunting?

*****************************
precisely!

I would have thought that the new hunting sticks/tripods would make the bipods redundant when hunting?

Not a chance, where I hunt and the way I hunt.

Most of what we do is the voorsit type of hunting, where you lie flat on the ground (hiding behind a bush with a tripod is not a very effective way to hide). There a bipod is the only way to do it.

Also the effective accurate range is quite different. Off sticks, I might shoot out to a max of 250m, but a bipod gives that same stability you can get at the range. Shoot out to 400m if you are in a position to work out the bullet drop and range. Also, off a bipod, headshots up to 150m are quite doable. I'm not confident enough to take them off sticks.

Have to agree to the above, but then again I do not shoot 400 m shots unless I am specifically going out on a preplanned long range shoot. I have to date not done this preplanned shoot ;D - Would like to one day do a 4-500 m shot in a hunt, but I usually tap out at 220 ish.
Then the hunt starts, a stalk.

Also look at a quick-detachable bi-pod type.
The Harris screw was not designed for quick mounting and dismounting.

Do you have examples of the quick detach type that are sold locally.

The shops in my area of the woods don't have a lot of choice available.

How about this one?
https://www.takealot.com/hunting-rifle-bipod/PLID69412527

Wow, those are cheap. :o Hard to imagine they will have the durability and functionality of a Harris or UTG?

Wow, those are cheap. :o Hard to imagine they will have the durability and functionality of a Harris or UTG?

I bought 2 of them about 2 years ago. Both do duty on competition rifles and have seen some use.

My son now bought another one, as he prefers this type over the Harris that he borrowed from me.

These bipods are basically pirate copies of the Atlas, which sells for 6-8k. The swivel mechanism is not very smooth when adjusting for cant, but I added a thin steel washer between the 2 "ball and cup" parts and now it moves smoothly with the right amount of resistance. No breakages yet.

Yes, I would rate them excellent value for the money.

I would have to second 223, Cody always wanted a set of bi pods for his rifle,(I hate them) I eventually got him a second hand set of good name brand and we fitted them. Boy was so chuffed, then he left his rifle on the roof of the bakkie and a storm came up, one of those 0 - 100 km/hr winds in 2 minute things. The rifle blew off the roof and the bi pod snapped. While I was getting it aluminium welded, a another hunter who also had bi pods but secretly also hated them, saw the chance to get rid of them. So next hunt Cody had this El Cheapo off the web set of bi pods on his rifle, roff they are, but 3 - 4 years later he still has the cheap pair on and does not want his R1000 second hand ones back.
They are roff and need "a rubber put here and a spacer there" to be really good, but they are good once tweeked, a bit like Lee products actually.