7mm PRC

NE Newton 9 months ago

Anyone using one of these ?
I may have to re-barrel my 300WM and thinking of options
7 PRC same case rim diameter as 300WM
I appreciate the licencing will be a PITA but thinking about the cartridge choice
One could use the 7PRC as a target rifle and have a 7mm-08 or 7x64 for hunting using similar reloading components - to save money

1

That .280 must the surely be better.

The 280 AI = Ackley Improved NOT "Artificial Intelligence" is a very popular round with a loyal following
Also see the Sherman wildcats

308 Win leads to 7-08, and it is a good cartridge.

30-06 leads to 280 Rem (7-06) - it only makes sense.

That .280 must the surely be better.

The 280 AI = Ackley Improved NOT "Artificial Intelligence" is a very popular round with a loyal following
Also see the Sherman wildcats

That .280 must the surely be better.

7x64 = 270 Win for all practical purposes.

SORRY .. :o
280 REMINGTON ... 270 WINCHESTER is the Treeman special flavour .... :)

270 Winchester

280 Remington

[attach id=1447]30-06_offspring.jpg[/attach]

ALL based off the very old 30-06

7x64 = 270 Win for all practical purposes.

One could use the 7PRC as a target rifle and have a 7mm-08 or 7x64 for hunting using similar reloading components - to save money

The powder would probably be different, but bullets might used in both, depending on barrel twist and intent.

Primers could be used in both, except if one wants/needs to use magnum primers in the larger PRC case.

There is not much to save because the most expenses are calibre specific, or basically equal for both calibres.

A bit of saving IF your other rifle was 223 , 6.5 , or 30 calibre
Dies would of course be different - although 7x64 has been around for a long time so could get purchased used
Not sure if HOWA does a 7x64 ? - they do do a 7mm-08

Howa doesn't do a 7x64 but they may have done a run of 280Rem, which is for all practical purposes the same cartridge with an American name. Anyway it's a moot point because we don't get it in SA.

I think the 7mm is the pick of the PRC cartridges.

I have a 7x64 built on a P14 action.

You may find this interesting
Last formal military unit using the P17

Also f0r .. GLOCK lovers

I have a 7x64 built on a P14 action. A wonderful calibre and mostly chambered by Euopean manufacturers (Sako, Tikka, Mauser, CZ)

I would suggest a 7-08 as a second rifle as that is much easier to obtain in South Africa. Many more manufacturers have that in their line. An Ackley conversion would be the optimum for a reloader.

Hi ,
Who did your P14 conversion ?
P14 was for the British 303 - a rimmed cartridge
P17 was for the American 30-06 rimless
Although one sees more P14's in SA than P17's
An old one not too expensive but all the necessary modification - another story

I have a 7x64 built on a P14 action. A wonderful calibre and mostly chambered by Euopean manufacturers (Sako, Tikka, Mauser, CZ)

I would suggest a 7-08 as a second rifle as that is much easier to obtain in South Africa. Many more manufacturers have that in their line. An Ackley conversion would be the optimum for a reloader.

One could use the 7PRC as a target rifle and have a 7mm-08 or 7x64 for hunting using similar reloading components - to save money

The powder would probably be different, but bullets might used in both, depending on barrel twist and intent.

Primers could be used in both, except if one wants/needs to use magnum primers in the larger PRC case.

There is not much to save because the most expenses are calibre specific, or basically equal for both calibres.

A bit of saving IF your other rifle was 223 , 6.5 , or 30 calibre
Dies would of course be different - although 7x64 has been around for a long time so could get purchased used
Not sure if HOWA does a 7x64 ? - they do do a 7mm-08

https://www.agrimark.co.za/product/howa-rifle-ba-7prc-hb-26in-tc

Thanks
Yes I saw that one - appears the special reduced price only works in selected stores .. CERES and UPINGTON

One could use the 7PRC as a target rifle and have a 7mm-08 or 7x64 for hunting using similar reloading components - to save money

The powder would probably be different, but bullets might used in both, depending on barrel twist and intent.

Primers could be used in both, except if one wants/needs to use magnum primers in the larger PRC case.

There is not much to save because the most expenses are calibre specific, or basically equal for both calibres.

Just to .. whet your appetite ...

HOWA in 7mmPRC

8)